Tera Pump Universal Gas Can Battery Powered Transfer Pump - TRFA03

Features

• Power Nozzle
  • Based on their best selling TRFA01, pump has been upgraded to have the power button right on the nozzle
  • Redesigned auto stop nozzle for ergonomic feel
• Emergency Power
  • Recommended to use all 4x (AA) batteries when you are able to, but it is possible to operate with 2x (AA) batteries during emergencies
• Auto Stop Sensor
  • Auto-Stop System to prevent fuel loss or accidental spills
  • Their Built-In Sensor will automatically stop without the need to press the off button preventing any Overflow
• Vinyl Hose
  • Upgraded outtake hose to Vinyl to be resistant against minor nicks and cuts
• Hands-Free Experience
  • Built-in locking clip secures nozzle on receiving receptacles for a hands free experience
• Universal Can Adapter
  • Includes a Built-in Universal Gas Can Adapters
  • Compatible with Briggs & Stratton, No-Spill & Midwest Can
  • Gas Can NOT Included & Does Not fit FMD Gas Cans

Specifications

• Power: 4x (AA) Batteries, Sold Separately
• Flow Rate: 2.6 Gallons per Minute
• Suction Tube: 18.1 inch
• Discharge Hose: 39.4 inch
• Compatible Liquids: Gasoline, E15, E85 (Remove pump after use, E85 may corrode seals), diesel, kerosene & non-potable water

Incompatible

• Drinking water, thinners, solvents, hot liquids, acetone, benzene, creosol, phenol, methyl ethyl, concentrated caustic liquid soda, nitric acid, hydrochloric acid, sulfuric acid etc

Disclaimer

• The TRFA03 and TRFA03-XL models can pump E-85, but it requires flushing the pump with water or gas afterward for optimal performance

Includes

• Transfer Pump & Manual

How to Use

• Insert intake hose into the supply tank and fasten the pump's universal thread adapter tightly
• Attach the auto=stop nozzle to your receiving tank using the clip, make sure toe the auto-stop nozzle is in a vertical position
• Turn the switch on to start the flow
• After automatically stopping, bring the auto-stop nozzle up above the tank to drain the excess fuel or liquid back into the supply tank
• Insert the auto-stop nozzle in the nozzle holder for storage

Caution

• Do not run dry
• Wear proper personal protective equipment
• Never operate pump near fire or source of spark
• Do not turn the pump upside down after use
• Operate only in open, cool, and well-ventilated areas
• Do not over tighten any part